Ethernet Layer 2 Traffic Test
15:27
This how-to video shows how to run the Ethernet Layer 2 Traffic test to measure Ethernet key performance indicators (KPIs) in Real TIme.
Related Videos
In OneAdvisor-800
-
Play video FTTA Test Process Automation
FTTA Test Process Automation
FTTA Test Process Automation
7:50
-
Play video Wireless Testing with the OneAdvisor 800
Wireless Testing with the OneAdvisor 800
Mobility Testing is made easy with the OneAdvisor 800. It addresses key industry challenges and complexity in one, easy-to-use platform. Use the OneAdvisor at installation to ensure service delivery and to troubleshoot issues.
5:00
-
Play video Y.1564 SAMComplete Ethernet Service Activation Tests
Y.1564 SAMComplete Ethernet Service Activation Tests
This how-to video shows how to run the Y.1564 SAMComplete service activation test to measures key Ethernet performance indicators including throughput, frame delay (latency), frame delay variation (jitter), frame loss rate, and committed burst size (
13:04
-
Play video Uplink Interference Detection
Uplink Interference Detection
Operators must keep the RF domain around cell sites free of signal interferences and also ensure that their towers do not interfere with each other due to network timing errors. See how VIAVI can help resolve timing and sync issues.
1:55
-
Play video How-To Test Tips: Reflection Return Loss and DTF with the Cable and Antenna Analysis Module
How-To Test Tips: Reflection Return Loss and DTF with the Cable and Antenna Analysis Module
Learn how to use the Cable and Antenna Analysis Module at a cell site to measure reflection return loss on a feed line as well as distance to fault (DTF) quickly and effectively.
5:15
-
Play video RFC 2544 Ethernet Service Activation Test
RFC 2544 Ethernet Service Activation Test
This how-to video shows how to run the RFC 2544 service activation test to measures key Ethernet performance indicators including throughput, latency, jitter, frame loss, and committed burst size (CBS).
12:17